To arm system:
1) Close all zones ( doors, windows, ect.)
2) Check to see if green ready light is lit.
3) If light is lit ,then enter your 4 digit code.
4) Red arm light will illuminate.
5) Leave premisis through designated entry/exit door.
To Disarm system:
1) enter through designated entry/exit door.
2) enter your 4 digit code.
3 arm light will go out.
To Bypass a zone:
1) enter the * key , then press 1
2) The bypass light will start to flash.
3) At this time , any previously bypassed zones will illuminate on
the keypad .
4) Now press the zone number you wish to bypass.
5) To unbypass a zone just follow the steps to bypass a zone for that
zone once it is bypassed.
6) When finished press the # key to return to ready.
To Display a Trouble condition on the keypad:
1)Press the * key , then 2
2) a zone light will illuminate to indicate the type of trouble condition.
as Follows:
1 Low Battery
2 Power failure ( May be unplugged or power outage)
3 Blown Fuse ( Call for Service)
4 communication failure ( Call for Service)
5 Fire alarm circuit trouble ( Call for Service)
6 Loss of system clock ( Call for instructions)
To Display an alarm in memory:
(after an alarm has occurred )
1) Press the * key , then 3
2) The last recorded alarm will light according to zone violated on
the keypad.
3) Press the # key to return to normal
Changing your codes:
1) Press the * key , then 5
2) Enter your MASTER code
3) At this time the memory , bypass and trouble lights will begin to
flash
4)The zone lights will indicate which of your 6 codes that you have
programmed as thus far.
5) now press the number of the code that you wish to program
as follows:
1 = MASTER code
2 = User code 1
3 = user code 2
4 = user code 3
5 = user code 4
6 = Temporary code only for 1 time use ( will delete automatically
after used once)
6) the number code you selected will appear on the zone light .
7) key in your new 4 digit code.
8) Press the # key to return to normal.
9) Follow above steps for all codes you wish to program.
Any questions or revisions should be adressed to Ira at State Security
.
(412)798-3131