This page explains the system functions for this system .

To View the zone list:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "Display zn directory" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) Use the " Next/yes" key on the right side of the keypad to scroll through the list
7) When finished press the "reset" key at the bottom left of the keypad

To view faulted zones:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the "Next/yes" key on the right side of the keypad
5) Use the " Next/yes" key on the right side of the keypad to scroll through the list
6) When finished press the "reset" key at the bottom left of the keypad

To view bypassed zones:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "Display zn bypassed" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) Use the " Next/yes" key on the right side of the keypad to scroll through the list
7) When finished press the "reset" key at the bottom left of the keypad

To Activate a bell test:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "Activate bell test" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) When finished press the "reset" key at the bottom left of the keypad

To diplay a system trouble:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "Display sys trbl" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) Use the " Next/yes" key on the right side of the keypad to scroll through the list
7) When finished press the "reset" key at the bottom left of the keypad

To Reset a system trouble:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "Reset sys trouble" appears.
5) Press the "Next/yes" key on the right side of the keypad

To activate the chime function:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "Activate Chime" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) To turn off chime follow steps 1-5 again

To view alarm log:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "View alarm log" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) Use the " Next/yes" key on the right side of the keypad to scroll through the list
7) When finished press the "reset" key at the bottom left of the keypad

To view system log:
1) Enter your 4 digit code
2) Press the function key at the top left of the keypad
3) You will now see a function listin on the screen saying " Display zn Faults"
4) Press the Function key until "View system log" appears.
5) Press the "Next/yes" key on the right side of the keypad
6) Use the " Next/yes" key on the right side of the keypad to scroll through the list
7) When finished press the "reset" key at the bottom left of the keypad