To Arm system from keypad:

1) Press in your 4 digit number .
2) Press the on/off key on the right side of the keypad.

To Disarm system from the keypad:

1) Press in your 4 digit number .
2) Press the on/off key on the right side of the keypad.

To reset smoke detectors:

1) Press the reset key at the lower left hand corner of the keypad.
2) Press in your 4 digit number .
3) Press the on/off key on the right side of the keypad.
4) You will receive a confirmation message "Cant arm system silencing"
5) System is now reset.

To arm/disarm  from a Keyfob:

1) To arm press the "on " button on the fob.You will hear a confirmation chirp from the siren.
2) To disarm press the " off " button on the fob.You will hear a double confirmation chirp from the siren.
3) For a panic alarm press and hold either of the 2 lower buttons on the fob. This will send an audible alarm from the system.

To Bypass faulted zones:

1) Enter your 4 digit code
2) Press the "bypass" key located on the left of the keypad
3) Display will read "Bypass eneabled"
4) Press the number of the zone that you would like to bypass ex. zone 1 would be 01 , zone 6 would be 06 , zone 10 would be 10 and so on
5) Then press the "bypass " key again.
6) There will now appear a small Bypass icon in the left hand side of the display
7) To unbypass a zone follow steps 4 thru 6 again.

This is only a basic users overview .For explanation of advanced system functions please refer to "System Functions Overview Page for Napco Gemini P-3200.